You know that feeling when you step on the gas pedal and your engine just purrs, delivering instant power and torque? Well get ready for an even bigger thrill! Installing a K&N cold air intake filter will take your vehicle's performance to the next level. The specially designed filter allows more airflow into your engine, resulting in better throttle response. And we're not just talking minor improvements here - we're talking significant horsepower and torque gains across the RPM range. As an added bonus, you'll love the aggressive induction roar from under the hood. So why wait? Ditch that stock air filter and feel the rush as your ride transforms into a true performance machine. With a K&N cold air intake, you'll push your engine to its limits and put a huge smile on your face every time you drive. The power is in your hands - unleash it!

What Is a K&N Cold Air Filter?

A K&N cold air filter is an high-performance air filter engineered specifically for horsepower and acceleration gains. It significantly improves airflow into your engine by providing more air volume and less restriction. More Air Means More Power

With a K&N cold air filter, your ride will be gulping huge amounts of cool, dense air. This massive increase in airflow results in an equally massive power increase. We’re talking 10-15 extra horsepower just by installing a K&N filter—no other mods needed!

2. Superior Filtration

Don’t worry about dirt or debris damaging your engine. K&N cold air filters provide superior filtration to keep your engine running clean. Made from multiple layers of cotton gauze sandwiched between wire mesh, these filters stop particles as small as one micron. At the same time, the innovative design minimizes air flow restriction. It’s the best of both worlds.

Washable and Reusable

Unlike disposable paper filters, K&N cold air filters are washable and reusable. Simply clean and reoil your filter every 50,000 miles or so and it’s good as new. This environmentally-friendly, cost-saving design means you’ll likely never need to buy another air filter for your vehicle.

With more power, better filtration, lower costs, and less waste, a K&N cold air filter is a performance upgrade that ticks all the boxes. Why settle for stock when you can push your engine to the limit with K&N? The extra oomph you’ll feel behind the wheel is reason enough to make the switch. Your ride deserves the best—give it a K&N cold air filter today!

How Does a Cold Air Intake Work?

A cold air intake is designed to bring cooler, denser air into your engine. The Science Behind It

Cooler air is more dense than hot air, meaning it contains more oxygen in the same volume. More oxygen means more complete combustion, which translates to more power and efficiency.

Sucking in the Cool Stuff

A cold air intake system replaces your stock air filter and intake tube with a high-flow filter and tube that pulls air from outside the engine bay. This provides a ready supply of cool, oxygen-rich air for your engine to gobble up.

The stock intake system pulls hot air from inside the engine bay, limiting performance. A cold air intake overcomes this by tapping into cooler air outside the bay, often in special enclosures that shield the filter from engine heat. Some intakes feature special heat shields and enclosures to keep intake temperatures as low as possible.

Rev Up Your Engine

More oxygen and denser fuel mixtures mean bigger explosions in your cylinders. This results in an increase in horsepower, often 10 HP or more on some vehicles. You'll also notice improved throttle response since the engine doesn't have to work as hard to take in air.

The cooler, more oxygen-rich air also helps your engine run more efficiently. This can improve your fuel economy, especially at freeway speeds. While the improvements are usually modest, every little bit helps when gas prices are high.

So if you're looking for an affordable, easy-to-install upgrade that will boost your engine's power and performance, a cold air intake system is a great place to start. Why settle for stock when you can unleash your vehicle's full potential? Rev up your ride today with a high-performance cold air intake from K&N.

Benefits of Installing a K&N Cold Air Filter

Want to boost your ride’s performance without breaking the bank? Installing a K&N cold air filter is one of the easiest and most affordable ways to increase horsepower and improve throttle response. You'll instantly notice your engine purring like a kitten as the K&N filter lets it gulp in huge amounts of cold, dense air.

More Power

K&N filters are designed specifically for performance, engineered to provide maximum airflow to your engine. More air means more power—you can expect up to 10 extra horsepower just by installing a K&N filter. The difference will be obvious every time you step on the gas. Your vehicle will accelerate faster and feel significantly more responsive.

Improved Fuel Efficiency

The increased airflow from a K&N filter also helps your engine burn fuel more efficiently. You may gain up to 2 miles per gallon, especially at lower RPMs and cruising speeds. Over time, the savings in fuel costs can offset the initial purchase price of the filter. It’s a win-win for both performance and your wallet.

High Quality Construction

K&N filters are built to last a lifetime, constructed from premium materials that can withstand extreme heat and continuous use. The cotton gauze filter media is pleated for maximum surface area and coated in a special oil that helps capture even the smallest particles while still allowing maximum airflow. An airtight seal and durable housing also help ensure all that additional air is routed directly to your engine.

For any gearhead, a K&N cold air filter is a must-have upgrade that delivers real results you can feel every time you hit the road. More horsepower, improved throttle response, increased fuel efficiency—what’s not to love? Your engine will thank you, and so will your need for speed.

Choosing the Right K&N Cold Air Filter for Your Vehicle

Get That Perfect Fit

When it comes to maximizing your vehicle’s performance, nothing beats a custom K&N cold air filter designed specifically for your make and model. Head to knfilters.com and enter your vehicle details to find a filter tailored to your needs. K&N has been designing high-performance filters for over 50 years and has a filter for virtually any vehicle on the road today.

Size Matters

The shape and size of your vehicle’s air filter and airbox determine how much air can flow into the engine. K&N’s oversized conical filters are engineered to allow up to 50% more airflow than a standard paper filter. More air means more power and better performance. Can you say vroom vroom?

Washable and Reusable

Unlike disposable paper filters that need frequent replacing, K&N filters are washable and reusable. Simply clean your filter when it gets dirty and re-oil it—it will perform like new again. A single K&N filter can last up to 50,000 miles before needing replacement, saving you time, money and helping the environment.

Premium Protection

K&N’s cotton-gauze filter media traps particles as small as 10 microns to provide excellent engine protection. Its innovative design helps ensure only clean, filtered air enters your engine. Best of all, K&N filters come with a million-mile limited warranty, so you can have peace of mind that your vehicle’s performance and engine are in good hands.

Unleash Your Engine’s Potential

A K&N cold air filter is the perfect performance upgrade for any vehicle. Custom-engineered for your specific model, it allows more airflow to give you increased power, acceleration and fuel efficiency. Best of all, it’s reusable and provides long-lasting engine protection. For an easy, affordable performance boost, choose a K&N filter and get ready to unleash your engine’s full potential!

Step-by-Step Installation Guide

Remove Stock Intake

Pop the hood and locate your stock intake tube—that’s the factory air filter housing and tube. Loosen the hose clamps securing it in place with a flathead screwdriver and remove the whole assembly. This frees up space for your high-performance K&N filter and tube.

Install Edge Trim

The K&N air filter housing comes with edge trim you’ll need to install around the rim of the housing. Just peel off the backing and press the trim firmly onto the edge of the housing. The trim creates an airtight seal between the filter and housing.

Attach MAF Sensor

Find the mass air flow (MAF) sensor on your stock intake tube. Remove it and clamp it onto the provided adapter tube to attach to your new K&N intake tube. The MAF sensor measures the amount of air entering your engine so your vehicle’s computer can determine the right fuel ratio. Attaching it to the K&N tube ensures you get the performance boost without messing with your engine’s settings.

Install Filter Housing and Intake Tube

Now you’re ready to install the main components. Slide the K&N air filter into the housing, then fit the housing into the same space as your stock air box. Attach the intake tube to the housing and MAF sensor adapter, then secure the other end of the tube to your throttle body. Double check that all connections are tight and the filter is properly seated—you want maximum airflow with no leaks!

Add Heat Shield

The final step is installing the heat shield to protect your high-performance air filter from engine heat. Assemble the two-piece shield, then secure it in your engine bay over the air filter housing using the provided hardware. Put on the shield lid and you’re ready to start your engine—you’ll immediately notice the deep roar of the free-flowing air filter!

With some basic hand tools and these straightforward steps, you'll be boosting your engine's power and unleashing its full potential in no time. The K&N cold air filter is designed for maximum performance and the easiest possible installation. Get ready to push your vehicle to the limit!

Maintaining Your K&N Cold Air Filter

Your K&N cold air filter is built to last, but to keep it running at peak performance, you’ll need to show it some TLC from time to time. The good news is, maintaining your K&N filter is super easy and will only take a few minutes of your time every 50,000 miles or so.

Cleaning Power

When it’s time for a cleaning, grab your bottle of K&N filter cleaner and spray it liberally over the entire surface of the filter. Don’t be shy—really soak that baby down until the cleaner is dripping from the edges. Let it sit for about 10 minutes so it can fully penetrate the filter fibers. Then simply rinse the filter with water from the back side out until the water runs clear. Shake out any excess water and let your filter air dry completely before reinstalling.

Oiling for Optimal Flow

Once your filter is squeaky clean and dry, it’s time to re-oil it. Apply 4-6 drops of K&N filter oil to each pleat on the dirty side of the filter. Gently rub it in with your fingertips, making sure to coat each pleat evenly. The oil helps trap dirt and debris, while still allowing maximum airflow. Go easy on the oil though, as too much can drip onto your air intake.

Reinstall and Go!

With your filter cleaned, oiled, and ready to go, simply pop it back into your cold air intake system. In just a few minutes of easy maintenance, you’ve restored your filter to like-new condition. Now get out there and drive—your engine will thank you for it with smoother performance, better acceleration and increased power. Maintaining your K&N filter is one of the easiest ways to keep your vehicle running at its peak. Why not do your engine a favor and schedule a cleaning today? Your filter will love you for it!

Improved Performance With a K&N Cold Air Filter

A K&N cold air filter is like rocket fuel for your engine. Once installed, you'll immediately notice your vehicle breathing deeper and running stronger. The high-flow, reusable K&N filter provides a massive amount of clean, cool air to your engine, resulting in more power, better acceleration and higher top speeds.

More Air Means More Power

K&N's superior filtration technology and larger filter area allow up to 50% more airflow than a standard paper filter. This means more oxygen reaches your engine, allowing for a bigger explosion in the cylinders and increased horsepower. Many K&N customers report gains of 5 to 10 horsepower or more, especially on modified engines. You'll feel the difference every time you hit the gas!

Optimal Engine Combustion

K&N's oiled cotton-gauze filter media allows air to flow more freely while trapping more dirt and contaminants. This helps your engine "breathe" easier and run more efficiently. The improved airflow and filtration enable your engine to burn fuel more completely, increasing performance and improving your gas mileage. Many customers report 1 to 2 mpg gains after installing a K&N air intake system.

Reusable and Environmentally Friendly

Unlike standard paper filters that need to be replaced frequently, a K&N performance air filter is reusable and will last up to 50,000 miles before needing to be cleaned. Simply wash, dry and re-oil the filter to restore airflow performance. This not only saves you money but also helps reduce waste and environmental impact. When it's finally time for a replacement, K&N filters are also recyclable.

A K&N cold air filter is the perfect upgrade for anyone looking to improve performance, increase power, maximize engine efficiency and save money. Once installed, you'll never want to go back to a standard paper filter again! Your engine—and your driving experience—will thank you.

Other K&N Air Intake Products

K&N is the original performance air filter company, serving the high-performance aftermarket for over 50 years. Their passion for performance fuels their constant innovation. In addition to their famous washable and reusable High-Flow Air Filters, they offer a variety of other performance air intake products to boost your engine’s power and sound.

Their cold air intakes are custom-designed for your specific vehicle to maximize airflow and engine performance. Installing one of their cold air intakes can increase your horsepower, torque, and acceleration. The roar of the engine will make you feel like you’re in the driver’s seat of a high-performance race car! Their cold air intakes feature premium components like aluminum intake tubes, durable polyethylene air boxes, and a choice of red or polished aluminum filter housings to match your engine bay.

For even more power, combine one of their cold air intakes with a K&N performance fuel filter or throttle body spacer. Their fuel filters provide superior filtration to protect your engine while maximizing flow. Their throttle body spacers can give you an extra boost in mid-range power and torque. They’re easy to install and work with your stock or aftermarket cold air intake.

Whether you're looking to simply enhance the sound of your engine or gain serious horsepower, K&N has the high-performance air intake products to push your vehicle's performance to the limit. Their passion for innovation and premium engineering are why K&N remains the leader in high-performance air intake systems. Unleash your vehicle’s full potential and feel the thrill of extra acceleration and power with K&N!

FAQs About K&N Cold Air Filters

So you’ve decided to boost your vehicle’s performance with a K&N cold air filter. Excellent choice! You’re going to love how much peppier your ride feels. But you probably have a few questions about these high-flow filters before installing one. No worries, we’ve got you covered!

How often do I need to replace a K&N filter? Hardly ever! K&N filters are designed to last up to 50,000 miles under normal driving conditions. Unlike standard paper filters that need replacing every 12,000 to 15,000 miles, a K&N is a lifetime filter. It can last as long as you own your vehicle. How great is that?

Do K&N filters actually increase horsepower? Yes, they do! K&N’s oiled cotton gauze filters allow more air to flow into your engine. This means more oxygen for combustion, which translates into more horsepower and torque. You can expect to gain 3 to 10% more power just by installing a K&N air filter. The exact increase depends on your vehicle and engine.

Will a K&N void my vehicle’s warranty? Nope, K&N filters will not void your manufacturer’s warranty. They are designed to be a direct replacement for your stock air filter, so they won’t damage your engine in any way. K&N even provides a limited 1 million mile warranty on their filters to give you peace of mind.

Do K&N filters require maintenance? K&N filters do require occasional cleaning and re-oiling to keep operating at peak efficiency. The filter can typically go 30,000 to 50,000 miles between cleanings depending on your driving conditions. K&N provides cleaning kits that include everything you need to thoroughly clean and re-oil your filter. The whole process only takes about 30 minutes.

Will a K&N filter damage my MAF sensor? No, K&N air filters will not harm your vehicle’s mass air flow (MAF) sensor. K&N filters meet or exceed OEM filter standards and are specifically engineered to work with MAF sensors. As long as you properly clean and re-oil the filter according to the instructions, it will not cause any issues with your MAF sensor.

Any other questions? Don’t hesitate to contact K&N’s customer service. They have a wealth of knowledge about their high-performance air filters and can provide recommendations for your specific vehicle. Happy motoring and enjoy the added power from your K&N cold air filter!

Conclusion

You just read how a K&N cold air intake filter can totally transform your ride. Increased engine airflow means more horsepower, torque, and acceleration. We're talking a serious boost in performance. This easy-to-install upgrade will make your engine breathe better and run stronger. Now go ahead and treat your car to a K&N filter. Unlock that extra power and feel the rush. Your engine will thank you, and you'll have a blast pushing the pedal to the metal. So what are you waiting for? Ditch the stock air filter and go K&N. Your engine is just begging for this sweet mod. Once you experience the insane power gains, you'll be grinning ear to ear.